We have certified plumbers to remodel your Drain or Sink in Monroe LA.
 Prompt. Expert. Service.
Want to be a Plumbing repair service technician in Monroe LA? - Call us.
Call All Plumbing, Inc. for your Plumbing needes in West Monroe LA.
605 Sterlington Rd Monroe, LA 71203
 
For Drain repair in Monroe LA, like us on Facebook!
For Toilet repair in Calhoun LA, visit us on Google Plus!
For information regarding Pipe work repair near West Monroe LA, email All Plumbing, Inc..
Read what your neighbors say about the Plumbing repair or installation we performed near Monroe LA on Yelp!
Watch our Water Heater repair service in Monroe LA on Youtube.
 
See what makes All Plumbing, Inc. your number one choice for Water Heater repair in West Monroe LA.
Call All Plumbing, Inc. for your Plumbing needes in West Monroe LA.

Energy Efficient Water Heating

Energy-Efficient Water Heating

If you haven't already, you can save energy and money by installing a new, more energy-efficient water heater in your home

Reduce Hot Water Use for Energy Savings

You can lower your water heating costs by using and wasting less hot water in your home. To conserve hot water, you can fix leaks, install low-flow fixtures, and purchase an energy-efficient dishwasher and clothes washer.

Fix Leaks

You can significantly reduce hot water use by simply repairing leaks in fixtures—faucets and shower heads—or pipes. A leak of one drip per second can cost $1 per month.

If your water heater's tank leaks, you need a new water heater.

Install Low-Flow Fixtures

Federal regulations mandate that new shower head flow rates can't exceed more than 2.5 gallons per minute (gpm) at a water pressure of 80 pounds per square inch (psi). New faucet flow rates can't exceed 2.5 gpm at 80 psi or 2.2 gpm at 60 psi. You can purchase some quality, low-flow fixtures for around $10 to $20 a piece and achieve water savings of 25–60%.

Shower Heads

For maximum water efficiency, select a shower head with a flow rate of less than 2.5 gpm. There are two basic types of low-flow shower heads: aerating and laminar-flow. Aerating shower heads mix air with water, forming a misty spray. Laminar-flow shower heads form individual streams of water. If you live in a humid climate, you might want to use a laminar-flow shower head because it won't create as much steam and moisture as an aerating one.

Before 1992, some shower heads had flow rates of 5.5 gpm. Therefore, if you have fixtures that pre-date 1992, you might want to replace them if you're not sure of their flow rates. Here's a quick test to determine whether you should replace a shower head:

  1. Place a bucket—marked in gallon increments—under your shower head.
  2. Turn on the shower at the normal water pressure you use.
  3. Time how many seconds it takes to fill the bucket to the 1-gallon (3.8 liter) mark.

If it takes less than 20 seconds to reach the 1-gallon mark, you could benefit from a low-flow shower head.

Faucets

The aerator—the screw-on tip of the faucet—ultimately determines the maximum flow rate of a faucet. Typically, new kitchen faucets come equipped with aerators that restrict flow rates to 2.2 gpm, while new bathroom faucets have ones that restrict flow rates from 1.5 to 0.5 gpm.

Aerators are inexpensive to replace and they can be one of the most cost-effective water conservation measures. For maximum water efficiency, purchase aerators that have flow rates of no more than 1.0 gpm. Some aerators even come with shut-off valves that allow you to stop the flow of water without affecting the temperature. When replacing an aerator, bring the one you're replacing to the store with you to ensure a proper fit.

Purchase Energy-Efficient Dishwashers and Clothes Washers

The biggest cost of washing dishes and clothes comes from the energy required to heat the water. You'll significantly reduce your energy costs if you purchase and use an energy-efficient dishwasher and clothes washer.

Dishwashers

It's commonly assumed that washing dishes by hand saves hot water. However, washing dishes by hand several time a day can be more expensive than operating an energy-efficient dishwasher. You can consume less energy with an energy-efficient dishwasher when properly used and when only operating it with full loads.

When purchasing a new dishwasher, check the EnergyGuide label to see how much energy it uses. Dishwashers fall into one of two categories: compact capacity and standard capacity. Although compact-capacity dishwashers may appear to be more energy efficient on the EnergyGuide Label, they hold fewer dishes, which may force you to use it more frequently. In this case, your energy costs could be higher than with a standard-capacity dishwasher.

One feature that makes a dishwasher more energy efficient is a booster heater. A booster heater increases the temperature of the water entering the dishwasher to the 140ºF recommended for cleaning. Some dishwashers have built-in boosters, while others require manual selection before the wash cycle begins. Some also only activate the booster during the heavy-duty cycle. Dishwashers with booster heaters typically cost more, but they pay for themselves with energy savings in about 1 year if you also lower the water temperature on your water heater.

Another dishwasher feature that reduces hot water use is the availability of cycle selections. Shorter cycles require less water, thereby reducing energy cost.

If you want to ensure that your new dishwasher is energy efficient, purchase one with an ENERGY STAR label.

Clothes Washers

Unlike dishwashers, clothes washers don't require a minimum temperature for optimum cleaning. Therefore, to reduce energy costs, you can use either cold or warm water for most laundry loads. Cold water is always sufficient for rinsing.

Inefficient clothes washers can cost three times as much to operate than energy-efficient ones. Select a new machine that allows you to adjust the water temperature and levels for different loads. Efficient clothes washers spin-dry your clothes more effectively too, saving energy when drying as well. Also, front-loading machines use less water and, consequently, less energy than top loaders.

Small-capacity clothes washers often have better EnergyGuide label ratings. However, a reduced capacity might increase the number of loads you need to run, which could increase your energy costs.

If you want to ensure that your new clothes washer is energy efficient, purchase one with an ENERGY STAR label.

Lower Water Heating Temperature for Energy Savings

You can reduce your water heating costs by simply lowering the thermostat setting on your water heater. For each 10ºF reduction in water temperature, you can save between 3%–5% in energy costs.

Although some manufacturers set water heater thermostats at 140ºF, most households usually only require them set at 120ºF or even 115ºF. Water heated at 140ºF also poses a safety hazard—scalding. However, if you have a dishwasher without a booster heater, it may require a water temperature within a range of 130ºF to 140ºF for optimum cleaning.

Reducing your water temperature to 120ºF also slows mineral buildup and corrosion in your water heater and pipes. This helps your water heater last longer and operate at its maximum efficiency.

Consult your water heater owner's manual for instructions on how to operate the thermostat. You can find a thermostat dial for a gas storage water heater near the bottom of the tank on the gas valve. Electric water heaters, on the other hand, may have thermostats positioned behind screw-on plates or panels. As a safety precaution, shut off the electricity to the water heater before removing/opening the panels. Keep in mind that an electric water heater may have two thermostats—one each for the upper and lower heating elements.

Mark the beginning temperature and the adjusted temperature on the thermostat dial for future reference. After turning it down, check the water temperature with a thermometer at the tap farthest from the water heater. Thermostat dials are often inaccurate. Several adjustments may be necessary before you get the right temperature.

If you plan to be away from home for at least 3 days, turn the thermostat down to the lowest setting or completely turn off the water heater. To turn off an electric water heater, switch off the circuit breaker to it. For a gas water heater, make sure you know how to safely relight the pilot light before turning it off.

Insulate Your Water Heater Tank for Energy Savings

Unless your water heater's storage tank already has a high R-value of insulation (at least R-24), adding insulation to it can reduce standby heat losses by 25%–45%. This will save you around 4%–9% in water heating costs.

If you don't know your water heater tank's R-value, touch it. A tank that's warm to the touch needs additional insulation.

Insulating your storage water heater tank is fairly simple and inexpensive, and it will pay for itself in about a year. You can find pre-cut jackets or blankets available from around $10–$20. Choose one with an insulating value of at least R-8. Some utilities sell them at low prices, offer rebates, and even install them at a low or no cost.

Insulating an Electric Water Heater Tank

Energy-Efficient Water Heaters Monroe LAYou can probably install an insulating pre-cut jacket or blanket on your electric water heater tank yourself. Read and follow the directions carefully. Leave the thermostat access panel(s) uncovered. Don't set the thermostat above 130ºF on electric water heater with an insulating jacket or blanket—the wiring may overheat.

You also might consider placing a piece of rigid insulation—a bottom board— under the tank of your electric water heater. This will help prevent heat loss into the floor, saving another 4%–9% of water heating energy. It's best done when installing a new water heater.

Insulating a Gas Water Heater Tank

The installation of insulating blankets or jackets on gas and oil-fired water heater tanks is more difficult than those for electric water heater tanks. It's best to have a qualified plumbing and heating contractor add the insulation. If you want to install it yourself, read and follow the directions very carefully. Keep the jacket or blanket away from the drain at the bottom and the flue at the top. Make sure the airflow to the burner isn't obstructed. Leave the thermostat uncovered, and don't insulate the top of a gas water heater tank—the insulation is combustible and can interfere with the draft perter.

Insulate Hot Water Pipes for Energy Savings

Insulating your hot water pipes reduces heat loss and can raise water temperature 2ºF–4ºF hotter than uninsulated pipes can deliver, allowing for a lower water temperature setting. You also won't have to wait as long for hot water when you turn on a faucet or showerhead, which helps conserve water.

Insulate all accessible hot water pipes, especially within 3 feet of the water heater. It's also a good idea to insulate the cold water inlet pipes for the first 3 feet.

Use quality pipe insulation wrap, or neatly tape strips of fiberglass insulation around the pipes. Pipe sleeves made with polyethylene or neoprene foam are the most commonly used insulation. Match the pipe sleeve's inside diameter to the pipe's outside diameter for a snug fit. Place the pipe sleeve so the seam will be face down on the pipe. Tape, wire, or clamp (with a cable tie ) it every foot or two to secure it to the pipe. If you use tape, some recommend using acrylic tape instead of duct tape.

On gas water heaters, keep insulation at least 6 inches from the flue. If pipes are within 8 inches of the flue, your safest choice is to use fiberglass pipe-wrap (at least 1-inch thick) without a facing. You can use either wire or aluminum foil tape to secure it to the pipe.

Install Heat Traps on a Water Heater Tank for Energy Savings

If your storage water heater doesn't have heat traps, you can save energy by adding them to your water heating system. They can save you around $15–$30 on your water heating bill by preventing convective heat losses through the inlet and outlet pipes.

Heat traps—valves or loops of pipe—allow water to flow into the water heater tank but prevent unwanted hot-water flow out of the tank. The valves have balls inside that either float or sink into a seat, which stops convection. These specially designed valves come in pairs. The valves are designed differently for use in either the hot or cold water line.

A pair of heat traps costs only around $30. However, unless you can properly solder a pipe joint, heat traps require professional installation by a qualified plumbing and heating contractor. Therefore, heat traps are most cost effective if they're installed at the same time as the water heater. Today, many new storage water heaters have factory-installed heat traps or have them available as an option.

Install a Timer and Use Off-Peak Power for Electric Water Heaters

Install a timer on your electric water heater in Monroe LAIf you have an electric water heater, you can save an additional 5%–12% of energy by installing a timer that turns it off at night when you don't use hot water and/or during your utility's peak demand times.

You can install a timer yourself. They can cost $60 or more, but they can pay for themselves in about 1 year. Timers are most cost effective if you don't want to install a heat trap and insulate your water heater tank and pipes. Timers aren't as cost effective or useful on gas water heaters because of their pilot lights.

Contact your utility to see if it offers a demand management program. Some utilities offer "time of use" electricity rates that vary according to the demand on their system. They charge higher rates during "on-peak"< times and lower rates during "off-peak" times. Some even offer incentives to customers who allow them to install control devices that shut off electric water heaters during peak demand periods. These control devices may use radio signals that allow a utility to shut off a water heater remotely anytime demand is high. Shut-off periods are generally brief so customers experience no reduction in service.

Drain-Water Heat Recovery

Any hot water that goes down the drain carries away energy with it. That's typically 80–90% of the energy used to heat water in a home. Drain-water (or greywater) heat recovery systems capture this energy to preheat cold water entering the water heater or going to other water fixtures.

How It Works

How Water Heaters WorkDrain-water heat recovery technology works well with all types of water heaters, especially with demand and solar water heaters. Also, drain-water heat exchangers can recover heat from the hot water used in showers, bathtubs, sinks, dishwashers, and clothes washers. They generally have the ability to store recovered heat for later use. You'll need a unit with storage capacity for use with a dishwasher or clothes washer. Without storage capacity, you'll only have useful energy during the simultaneous flow of cold water and heated drain water, like while showering.

Some storage-type systems have tanks containing a reservoir of clean water. Drain water flows through a spiral tube at the bottom of the heat storage tank. This warms the tank water, which rises to the top. Water heater intake water is preheated by circulation through a coil at the top of the tank.

Non-storage systems usually have a copper heat exchanger that replaces a vertical section of a main waste drain. As warm water flows down the waste drain, incoming cold water flows through a spiral copper tube wrapped tightly around the copper section of the waste drain. This preheats the incoming cold water that goes to the water heater or a fixture, such as a shower.

By preheating cold water, drain-water heat recovery systems help increase water heating capacity. This increased capacity really helps if you have an undersized water heater. You can also lower your water heating temperature without affecting the capacity.

Cost and Installation

Prices for drain-water heat recovery systems range from $300 to $500. You'll need a qualified plumbing and heating contractor to install the system. Installation will usually be less expensive in new home construction. Paybacks range from 2.5 to 7 years, depending on how often the system is used.


U.S. Department of Energy - Energy Efficiency and Renewable Energy

See what makes All Plumbing, Inc. your number one choice for Plumbing repair in West Monroe LA.
605 Sterlington Rd
Monroe, LA, 71203
License #: #LMP3498
Call Us Today: Call All Plumbing, Inc. for your Drain needes in Monroe LA.


Connect With Us
For Plumbing repair in Monroe LA, like us on Facebook!
For Drain repair in Calhoun LA, visit us on Google!
Read what your neighbors say about the Plumbing repair or sink installation we performed near Monroe LA on Yelp!
For information on Plumbing installation near West Monroe LA, visit us on Youtube!
For Plumbing repair in Monroe LA, like us on Facebook!
For Drain repair in Calhoun LA, visit us on Google!
Read what your neighbors say about the Plumbing repair or sink installation we performed near Monroe LA on Yelp!
For information on Plumbing installation near West Monroe LA, visit us on Youtube!
For the best plumber in West Monroe LA, choose a BBB rated company.